AVI Leopard Series

AVI Leopard AD G 650

+65 62252238

Simultaneous double side scan – Up
to 2 CCD top and 2 CCD bottom

Easy Operation & Training – User
friendly interface

High speed system – 160mm/sec

High Uptime – Short set up, simple
and easy to use offline data

Process Security – Automatic sorting
of Good and Bad stacks

Clean Scanning Surface – Integrated
Dust cleaner

Wide material range – All rigid
materials(e.g. Ceramic)

Fully automatic on the fly alignment

  • Technical Information
  • DIMENSIONS - AD G 400 & AS G 400
  • Environmental Conditions
  • Features
  • Software
AD G 400/ AD G 650 Number of CCD 4 (2 top and 2 bottom side horizontal)
AS G 400 Number of CCD 2 (1 top and 1 bottom side horizontal)
Type of CCD Colour (RGB)
System Resolution 20 µm – 40 µm selectable/PO
Data Source:  Gerber only
AD G 400 Max scan area (x/y) 11.8” x 15.74” 300mm x 400mm
AS G 400 Max scan area (x/y)9.8” x 15.74”250mm x 400mm
AD G 650 Max scan area (x/y) 17.7” x 25.6” 450mm x 650mm
AD/AS G 400 Min scan size (x/y) 1.18” x 3.93” 30mm x 100mm
AD G 650 Min scan size (x/y)3.5” x 5.5”90mm x 140mm
Scan Speed (Double side) 6,3”per sec. 160mm per sec.
Detection Mode Image Contrast comparison & logic computing
Detectable Defects SM on Pad. Exposed Copper, Dishdowns, Trace Nicks, Broken SM Bridges, Missing SM, Legend Defects, Foreign Material Inclusions, Gold Defects, Discoloration, Contamination, etc.
Surface Finish HASL, Immersion Silver & Gold, Bare Copper, OSP, etc.
Defect sorting Good / N.G. Stacker
Defect Confirmation Online on the machine or Offline on VRS computer station
Width59.8" 1,520 mm
Depth118.1" 3,000 mm
Height75.8" 1,927 mm
Weight2646 lbs 1200 kg
Width 67.7" 1,720 mm
Depth 130.7" 3,320 mm
Height 73.8" 1,875 mm
Weight 2866 lbs 1300 kg
Power Supply230V, 50/65Hz, 1000W 3 wires
Air pressure6 bar dry and oil free
Air humidity45 - 65% - not condensing
Room Temp.61° - 79 °F 16 - 26 °C
• Offline Data Preparation Station
• Verification Software
• Integrated Dust Cleaner
User SoftwareWindows 10, English Version
User InterfaceGUI with multi-language support (Chinese, English, Japanese)
Data Input formatsGerber (Standard Gerber & Extended Gerber)

Get In Touch!

Get In Touch!



Mr. Syvret joined Gardien Services Canada as Financial Controller in 2001 and assumed the role of Finance Director North America in 2007. Over the past 20 years, Mr. Syvret has held senior finance and accounting roles, including with Canadian Pacific Ltd and Sprint Inc.



Mr. Niraj Patel joined the company on a part time basis in 1993 while attending college full time. He worked in various positions until he graduated from the Centennial College Computer Systems Technology program, whereupon he was hired full time. He progressed through several testing and CAM department positions and was appointed North American CAM Manager in 1998. After 18 years with the company, Mr. Patel was promoted to Senior Vice President of Operations, Gardien Services Canada Inc. in 2011. In January, 2015 Mr. Patel became Vice President NA of the newly combined organizational unit North America which includes the Canada and USA.



Mr. Todd Kolmodin, a native to the Pacific Northwest was born in Seattle Washington. At a young age he moved to the Portland Oregon area. In March of 1986 he graduated from ITT Technical Institute with a degree in Electronics Engineering Technology. Todd began his tenure in the Electrical Test field that same year.  Todd spent eight years working in an independent testing facility in Wilsonville Oregon where he built skills in all aspects of Electrical Test and Quality Assurance. 

Todd then spent a short term with Yamamoto Corporation on their Engineering staff covering PCB drill, finishing and Electrical Test before joining Probe Test Fixtures in 1995. His charge was CAM and Fixuring Manager.  Todd joined the Gardien Group in September 1998 continuing the same roll and taking on the responsibilities of Quality Manager for Oregon operations. In 2008 Mr. Kolmodin was promoted to Vice President Quality USA. In this position Mr. Kolmodin oversees and maintains the Gardien ITAR registration, ISO Multi-Site registration and multiple site Lab Suitability with the Defense Logistics Agency Land and Maritime. Now also maintaining the Gardien QMS system Todd now serves as Vice President Quality North America.

Mr. Kolmodin is also a published columnist and Technical Presenter with multiple appearances at the IPC Apex Expo Conferences in both San Diego and Las Vegas. 



Mr. Valentini was appointed COO in July 2010 after successfully serving as head of North American operations since 2005.

Roland has over ten years’ experience in the PCB industry, including sales, service, and project management at Atotech GmbH, Germany mainly relating to PCB plating equipment.
He has significant sales experience from his tenure at Mack Rides GmbH and headed up worldwide installations for Lurgi Bischoff GmbH.

Mr. Valentini received a Master’s Degree in Mechanical Engineering from the University of Mannheim, Germany.



Prior to Richard joining Gardien in September 2014, he was Chairman/CEO of tool chain vendor Atego Group Systems Limited which was sold to PTC Inc.

Prior to joining Atego, Richard held a number of Executive and Non-Executive roles including Senior Independent Non-Executive Director of Plethora Solutions, an AIM listed Pharmaceutical Company and CEO of AIM listed Cybit Holdings plc. where he grew the company from inception to revenues of over 25 million and took the company through multiple acquisitions before managing a sale of the business to Francisco Partners.

Richard previously held a number of senior roles in the Software industry.



Mr. Meraw was appointed Group Vice President of Quality in Jan 2015 after successfully  serving as Senior Vice President of USA operations since 2011.  Prior to being responsible for USA operations Mr Meraw was responsible for Canadian operations since 2001.

Rick has over twenty years’ experience with Gardien Group and has various roles including, service technician, customer liaison, Quality manager, technical support, project management, and software design/ implementation.

In June 1992 he graduated with an Electronic Engineering Technologist degree, with honors from a local community college.

Our People


Gardien USA Hub Office

Gardien Services USA Inc. PO Box 963 Midlothian, TX 76065 USA

+1 (503) 430 8980


Gardien Canada Hub Office

Gardien Services Canada Inc. 79 Milliken Blvd. Unit 4 Toronto, Ontario Canada M1V1V3

+1 (416) 292-0726


Toronto, Canada

79 Milliken Blvd. Unit 4 Toronto, Ontario Canada M1V1V3

+1 (416) 292-0726



1191 N Red Gum Street Anaheim, CA 92806 USA

+1 (714) 630 4600



1513 Taurus Ct. Loveland, CO 80537 USA

+1 (303) 527 1200



14000 25th Avenue North Suite 112 Plymouth, MN 55447 USA

+1 (763) 249 1102



1600 Orrin Rd Prescott, WI, 54021 USA

+1 (715) 262 5898


Our People


Group Headquarters

Gardien (SEA) Pte Ltd 105 Cecil Street. #16-01, The Octagon (Suite 1613) Singapore, 069534

+65 6225 2238